• VA 20
• VA 30 Black
• VA 8312
• VA 8406
• VA 100
• VA 300
• VA 1401
• VA 1500
• VA 2500 HT
• VA 250 Black
• Contact Gel
• VA 1408
• VA 1460
• VA 1403
• VM 20
• VM 120
• VM 2000
• Contact Filler, CA-Primer and Activator
• Pen System

WEICON Fast-Bonding Kit

• medium thick fibreboard
• Balsa-wood
• dense fibreboard
• chipboard (work top)
• compressed cardboard
• original wood (solid wood)
• plywood etc.

Also suitable for porous and absorbent metal, rubber and plastic surfaces.

Directions of use:

• ensure clean, dry, dust-free and degreased surfaces
• apply adhesive either drop by drop or in one coat on the surface depending on its size
• spray the Activator-Spray over the whole surface of the other part
• position the parts and hold together applying gentle pressure for approx. ten seconds. Excess adhesive which comes out of the bond line can be hardened by additionally spraying with the Activator
• depending on the properties of the material and the surfaces, the joint can be stressed within 45-60 seconds.
  
  

>> Brochure/ Technical data "Contact Cyanoacrylate Adhesives"
>> EC Safety data sheet (Overview)

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.