• WEICON A
• WEICON B
• WEICON BR
• WEIDLING C
• WEICON F
• WEICON F2
• WEICON SF
• WEICON ST
• WEICON TI
• WEICON UW
• WEICON WR
• WEICON WR2
• WEICON Ceramic BL
• WEICON Ceramic W
• WEICON HB 300
• WEICON Casting Resin MS 1000
• WEICON Flex Hardener

WEICON Plastic Metal Ceramic BL

liquid, brushable, mineral (carborundum and zircon) -filled, extremely wear resistant, high temperature resistant from -35°C up to +180°C

Brushable surface protection with extremely high wear and abrasion resistance. Forms a smooth surface of low friction which shows a high chemical resistance and which is used:

• for lining highly stressed pump cases
• as a wear protection for slide bearing, slides, funnels and pipes
• for repairing castings, valves and blower vanes

Large blowholes and/or damaged spots should be first filled with WEICON WR or WEICON WR2 as appropiate.

WEICON Ceramic BL forms an extremely hard surface with excellent edge strength and high mechanical strength.

>> Brochure/ Technical data "Plastic Metal"
>> EC Safety data sheets (overview)

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.