PRODUCTS > ELASTIC ADHESIVES  

WEICON Flex 310

elastic, strong, sandable, overpaintable

WEICON Flex 310

WEICON Flex 310 is a 1-component structural adhesive/sealant designed to serve various requirements in many fields of industry. Features of WEICON Flex 310 are permanently tough elasticity and excellent adhesive strength.

WEICON Flex 310After curing WEICON Flex 310 is of neutral odour, and can be sanded and overpainted (wet in wet) with most of the common paint and varnish systems*.

The rapid cure makes the product ideal for use not only in repair and maintenance, but also in production and construction.

WEICON Flex 310WEICON Flex 310 provides long-term resistance against water, seawater and many diluted acids and alkalis.
Temporarily resists fuels, oils and greases.
For non-absorbent surfaces pre-treatment with WEICON Primer Flex (bonding agent) is required.

WEICON Flex 310 bonds nearly all materials such as

  • metals
  • wood
  • plastics
  • glass, ceramics etc. to themselves or in combination.

Applications for WEICON Flex 310 are manifold:

  • tank and apparatus engineering
  • WEICON Flex 310car body, container and vehicle construction
  • ventilation and air conditioning
  • pipelines and pipe fittings
  • power plants and electrical industry
  • insulating and protective systems
  • ship and yacht building
  • many fields of plastics processing
  • and in applications where WEICON R.T.V. Sealants are less suitable.


Caracteristics:

WEICON Flex 310 are elastic adhesive/sealants with high adhesion force on the basis of polyurethane. The hardening process starts immediately after applying through the contact with air (air humidity).

>> Brochure/ Technical data
>> EC Safety data sheet (Overview)

* referred to DIN 52452

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.


back top
Choose your national or regional contact person for WEICON products!
Next event dates
2012, May 14 - 16
MMTS in Quebec (Canada)
Visit WEICON in Canada.
2012, May 22 - 24
AUTOMECHANIKA in Dubai (U.A.E.)
Visit WEICON in the U.A.Emirates.
2012, May 28 - Jun 2
BIEMH in Bilbao (Spain)
Visit WEICON in Spain.
2012, Jun 12 - 14
GPS in Calgary (Canada)
Visit WEICON in Canada.
2012, Jun 18 - 22
ACHEMA in Frankfurt (Germany)
Visit WEICON at Hall 9.0, Stand E53.
 
   
Last Update: 2011-11-15   13:35 Copyright © 2006-12  
Home | Site Map | RSS Newsfeed