• AT-44 Allround-Fluid
• W 44 T
• Silicone
• Bio-Cut
• Stainless Steel Care
• Metal-Fluid
• Bio-Fluid

WEICON Bio-Cut

Bio-Cut is a cooling lubricant which is not water-miscible and is primarily used for the metal cut and non metal cut processing of low to highly alloyed steel, stainless steel, aluminium and nonferrous heavy metal. This high-performance product is free of mineral oil and fully biodegradable. Bio-Cut protects machines and fixtures against corrosion for a long time.

Areas of application:

• drilling, turning, tumbling
• milling, broaching, sawing
• punching, bending, pressing
• tapping of all steel qualities, cast iron, stainless steel, copper, brass, aluminium and their alloys

Active environmental protection as it does not contain chlorine, sulphur, barium, lead, cadmium, nitrite, PCB and formaldehyde.

>> Brochure/ Technical data "Technical Liquids"
>> EC Safety data sheet (Overview)

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.