• Cockpit Spray
• Contact Spray
• Hand Protective Foam
• Metal-Fluid
• Stainless Steel Care Spray

WEICON Contact Spray

Eliminates leakage current and voltage loss

WEICON Contact Spray is based on a special combination of active ingredients for the care and protection of electrical contacts and components.

Dispels moisture from electrical contacts, prevents leakage current and voltage loss and keeps contacts, fuses, cable connections, etc. free of oxidation and sulphide deposits.

WEICON Contact Spray is therefore used, for example, in fuse boxes, intercom systems and gate drives, socket outlets, cable and plug connections, cable drums and extensions, electrical garden equipment and lighting systems.

Applications:

• Penetrates and dispels moisture and water
• Dissolves oxide deposits from contact points
• Protects permanently against oxidation and corrosion

Directions for use:
Apply only on switched-off and cooled-off appliances (pull out mains plug). Shake can thoroughly before use. Do not use on energized equipment. Apply a thorough coating at a distance of approx. 5 cm and allow to soak in for approx. 30 seconds. Absorb excess substance with a non-fluffy cloth.

Packaging: 400 ml spray can, Art.-No.: 11152400

>> Flyer / Technical data "Contact Spray"
>> EC Safety data sheets (Overview)

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.