PRODUCTS > TECHNICAL SPRAYS > LUBRICATING & MULTIFUNCTIONAL OILS  

WEICON Anti-Friction Spray MoS2

Dry lubrication with high pressure and temperature resistance

Anti-Friction Spray MoS2 forms a dust-, dirt- and water-rejecting separation layer with very good resistance to oils, greases and many chemicals. The product can be applied on almost all metal, plastic and wood surfaces.

The high portion of MoS2 provides a clean sliding lubrication, reduces friction, has excellent emergency running properties and reduces running noises.

Anti-Friction Spray MoS2 shortens and improves the slide-in conditions of sliding bearings, gears and other sliding contact surfaces, especially in conditions of high pressure and at low sliding speed.

WEICON Anti-Friction Spray

Properties:

  • Temperature resistant from –185°C (-301°F) to +400°C (+752°F)
  • Aging and weathering resistant
  • No resinifying
  • Extremely pressure-resistant
  • Constant coefficient of friction
  • Good lubrication also in case by case operation and after long standstill periods
  • Radiation resistant
  • Vacuum resistant
  • Free of silicone

Applications:

  • On sliding and running rails and guides
  • On conveyor belts, conveyor rollers and chutes
  • As coating on cutting tools
  • On products of loading installations, e. g. loading bridges, sectional gates, roller shutters, loading sheets or elevating platforms
  • As alternative to silicone-containing release agents and wherever oil or grease lubricants are not permitted or desired.

Directions:
Clean and degrease surfaces prior to application (e.g. WEICON Surface Cleaner). Shake can until the mixing ball is clearly heard. Spray on cleaned and dry surface from about 20 cm distance. In case of continued use, shake can again from time to time. At room temperature (+20°C/+68°F)), the coating is dust-dry approx. 15 minutes after spraying.

Packaging:
400 ml spray can, Art.-No.: 11539400

>> Brochure/ Flyer "Anti-Friction Spray"

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.


back top
Choose your national or regional contact person for WEICON products!
Next event dates
2012, May 14 - 16
MMTS in Quebec (Canada)
Visit WEICON in Canada.
2012, May 22 - 24
AUTOMECHANIKA in Dubai (U.A.E.)
Visit WEICON in the U.A.Emirates.
2012, May 28 - Jun 2
BIEMH in Bilbao (Spain)
Visit WEICON in Spain.
2012, Jun 12 - 14
GPS in Calgary (Canada)
Visit WEICON in Canada.
2012, Jun 18 - 22
ACHEMA in Frankfurt (Germany)
Visit WEICON at Hall 9.0, Stand E53.
 
   
Last Update: 2011-10-19   13:18 Copyright © 2006-12  
Home | Site Map | RSS Newsfeed