Skip to main content Skip to search Skip to main navigation


Do it yourself Applications
2-part adhesive, Fast-curing, Stair renovation, Dual-component cartridge

Lining an old staircase with laminate

If the staircase is past its prime and the stairs are worn out, a staircase renovation makes sense. Sounds expensive? It doesn’t have to be. The cost-efficient solution for a new, fresh look: lining the old staircase with laminate! With the right adhesive and this instruction, I will show the DIY enthusiasts among you how it’s down.

Staircase built in 1933

My brother and his little family have fulfilled their dream of owning a home. But at first, it didn’t really look like a dream come true. More like a diamond in the rough. The house, which was built in 1933, was in desperate need of renovation. With a lot of passion, sweat and effort, my brother has completely restored the entire building. Renovating the staircase was just one of many projects that had to be done. The stairs were lined with a dark, very old carpet. The goal was to replace it with modern laminate.

Checkliste

Materials:

  • laminate
  • angle
  • folding rule/angle template tool
Checkliste

Tools::

  • pencil
  • table saw
Skip product gallery

WEICON Produkte:

Contour Spatula Flexy | specially shaped spatula for effectively moulding contours
Contour Spatula Flexy
specially shaped spatula for effectively moulding contours
$12.31* (excl. VAT)

($12.31* / 1 PCE)

Details

Lining an old staircase with laminate

The right laminate

When choosing the right laminate, the basic principle should be “whatever pleases your eye is allowed”. Which means you can use any kind of laminate to line an old staircase. Alternatively, you can resort to vinyl. Both floorings have pros and cons. Laminate is cheaper, yet more sensitive when it comes to moisture. With vinyl, it’s the other way round: It’s usually a little more expensive, yet more resistant to moisture and dirt. So you have the choice. My brother ultimately went for laminate, as it offers another advantage: due to its material thickness, it is easier to install on surfaces that aren’t completely level.

staircase, construction, basement, unfinished, dust
staircase, basement, concrete, handrail, unfinished

Get rid of the old staircase! Prepare the surfaces

Step number 1 entails the preparation of the stairs for the adhesive bonding. For my brother that meant: ripping out the old carpet! Et voilà – just a little while later, old wooden stairs appeared with a lot of potential for a new look. My brother removed old adhesive residues on the wood by sanding them off. A little vacuuming later – and the stairs were ready for the adhesive bonding.

Measuring and cutting the panels to size

Before you can line the old stairs with laminate, you need to measure the panels and cut them to size individually. My brother was lucky to have an old staircase that runs straight. In that case, exact measuring by means of a folding rule is usually suffcient. If you’re looking at your spiral staircase full of doubt right now, do not despair. In that case it’s best to use an angle template tool.

Three important tips

  1. When measuring the riser, keep in mind to deduct the thickness of the step from the height.
  2. Allow for a one millimetre gap on the sides. That way, you prevent the panels from rubbing against the side walls later, which causes the stairs to creak.
  3. Even for steps that have seemingly the same size, always take the exact measurements! Especially with old staircases, like this one, the steps often slightly differ in their sizes, when you take a closer look.


You can cut the panels with the help of a table saw.

staircase, wooden panel, flooring, construction, gloves
staircase, spatula, handrail, drip, tooling

The right adhesive

Cleaned, measured, sawn. Time to get started! In order to line the stairs with the laminate, you not only need a high-strength, but also elastic adhesive. Elastic for the simple reason that you don’t want your stairs to creak every time someone steps on them. And how much of a WEICON employee would I be, if I hadn’t immediately recommended one of our adhesives to my brother? Our WEICON Flex 310 M 2 K MS-Polymer is the perfect choice to bond the panels. Not only since the adhesive is strong and elastic, but also since it’s suitable for full-surface bonding. That is because the 2-component system cures completely from the inside outwards even when used on larger surfaces.

Staircase lining – step by step

If now you finally want to line the old stairs with laminate, this is how you do it: 

  • Start with the top step and work your way down. 
  • Put the mixing nozzle on the cartridge of the Flex 310 M 2 K and insert it into a common cartridge gun. 
  • Dismiss the first 5-8 centrimetres of the dispensed bead, then apply the adhesive evenly (preferably in an S-shape) to the panels.
  • With the WEICON Contour Spatula Flexy, you can spread the adhesive even more evenly across the entire surface (cut off the perforated “teeth“ of the front edge first) 
  • Always attach the step first, then the riser. 
  • After just 60 minutes, the stairs can be stepped on.


The finishing touches

In the end, my brother was thrilled by how fast and easily an old staircase could be lined with laminate. As finishing touches, he attached angle trims to the edges, where the riser and the step meet. He sealed the joints with our WEICON Silicone A (grey). So what do you think, the result is quite the eyecatcher, isn’t it? I hope you have lots of fun and success with your own staircase renovation project!

staircase, wooden stairs, interior stairs, tread, step lighting
Comment area
Write a comment
Your comment will be released after review.
More article
  • construction adhesive, caulk cartridge, white sealant, caulking gun, black panel
    Installing a key safe - this is how it's done!
    You probably own multiple important keys – otherwise, you most likely wouldn’t have purchased a safe to store them. Now you would like to install your key safe, but you have no idea how to? Then this blog post is just right for you! We’ll explain to you how to attach your key safe securely to a suitable wall – in a few simple steps.
    Read the article now
  • Wall shelf, Wooden shelf, Glass insert, Floating design, Wall mounted
    Epoxy Resin Shelf I DIY Crafting Instructions
    You like unique pieces of furniture made of epoxy resin and wood and want to do your own epoxy resin DIY project? Then you’ve come to the right place! We’ll show you how to make your own small epoxy resin shelf with these DIY instructions. In our opinion, a great idea that is also suitable for “epoxy resin beginners”.
    Read the article now
  • Plastic adhesive, Dual-component cartridge, Automotive repair, Yellow packaging
    How to: repair a car side mirror
    It has probably happened to every driver at some point – a small, harmless collision with a surrounding object. Whether it’s a lamppost, a corner pillar that’s not easy to see in the rearview mirror, the gate in the parking garage or – as was the case for our colleague Dennis – the unfortunate collision of a side mirror with a pigeon that was trying to cross the road at low altitude. That really made a loud bang! A side mirror repair in the workshop can be quite costly. So is there a cheaper way to fix the damage?
    Read the article now